Shadowflare Full Version Free Download

ShadowFlare: All Episodes

Please follow the instruction below for each episode installation.

ShadowFlare: Episode One

ShadowFlare: Episode One, formerly sold for $14.99, is now being given away for free!

Warning: estimated download time is 3 hours and 46 minutes by 53.3 kbps modem. If you do not have broadband connection, we suggest you order a CD-ROM with Episode One and Two or a CD-ROM with All Episodes.

This contains the complete Episode One scenario. You don't need to have the ShadowFlare Pre-Scenario Demo installed before installing Episode One.

When you download this file, do NOT directly download to 'C:Program FilesShadowFlare', but download to a temporary folder such as 'C:SFTEMP1'.

After the download has completed, you will extract AND setup the files, i.e. the installation will involve two steps. The first step is to extract the downloaded self-extracting file (sf1.exe) to a temporary folder, and the second step is to actually setup the files to the program folder.

First, double-click the downloaded file (sf1.exe), and you will be asked for 'Install Directory:'. Do NOT specify 'C:Program FilesShadowFlare' at this point. You may accept the current default folder, or specify a temporary folder such as 'C:SFTEMP1'. Then the self-extracting file will create four temporary files: Data.sma, Setup.sma, SFSetup.exe and ReadMe.txt. Please read the ReadMe.txt file before you start the program. If you use Windows XP or Windows 2000, you must log on as an Administrator before you can setup ShadowFlare.

Second, run SFSetup.exe. During the setup, you will be asked for 'Copy To:' if this is the first time to run the setup. You can accept the default path 'C:Program FilesShadowFlare' or change the path to a new folder where you want to setup the program to.

After the setup is complete, you can safely remove the temporary files (sf1.exe, Data.sma, Setup.sma, SFSetup.exe and ReadMe.txt) and the folder you may have created to extract the setup files, i.e. 'C:SFTEMP1' in the above example.

ShadowFlare: Episode Two

You must have the ShadowFlare Episode One Version 2.001.000 installed before installing Episode Two. The version is displayed on the bottom right-hand corner of the initial screen after starting ShadowFlare.

When you download this file, do NOT directly download to 'C:Program FilesShadowFlare', but download to a temporary folder such as 'C:SFTEMP2'.

After the download has completed, you will extract AND setup the files, i.e. the installation will involve two steps. The first step is to extract the downloaded self-extracting file (sf2.exe) to a temporary folder, and the second step is to actually setup the files to the program folder.

First, double-click the downloaded file (sf2.exe), and you will be asked for 'Install Directory:'. Do NOT specify 'C:Program FilesShadowFlare' at this point. You may accept the current default folder, or specify a temporary folder such as 'C:SFTEMP2'. Then the self-extracting file will create four temporary files: Data.sma, Setup.sma, SFSetup.exe and ReadMe.txt. Please read the ReadMe.txt file before you start the program. If you use Windows XP or Windows 2000, you must log on as an Administrator before you can setup ShadowFlare.

Second, run SFSetup.exe. The setup will detect where you have installed Episode One before, and will copy the files to the same folder that you have installed Episode One.

After the setup is complete, you can safely remove the temporary files (sf2.exe, Data.sma, Setup.sma, SFSetup.exe and ReadMe.txt) and folder you may have created to extract the setup files, i.e. 'C:SFTEMP2' in the above example.

ShadowFlare: Episode Three

You must have the ShadowFlare Episode Two Version 2.002.000 installed before installing Episode Three. The version is displayed on the bottom right-hand corner of the initial screen after starting ShadowFlare.

When you download this file, do NOT directly download to 'C:Program FilesShadowFlare', but download to a temporary folder such as 'C:SFTEMP3'.

After the download has completed, you will extract AND setup the files, i.e. the installation will involve two steps. The first step is to extract the downloaded self-extracting file (sf3.exe) to a temporary folder, and the second step is to actually setup the files to the program folder.

First, double-click the downloaded file (sf3.exe), and you will be asked for 'Install Directory:'. Do NOT specify 'C:Program FilesShadowFlare' at this point. You may accept the current default folder, or specify a temporary folder such as 'C:SFTEMP3'. Then the self-extracting file will create four temporary files: Data.sma, Setup.sma, SFSetup.exe and ReadMe.txt. Please read the ReadMe.txt file before you start the program. If you use Windows XP or Windows 2000, you must log on as an Administrator before you can setup ShadowFlare.

Second, run SFSetup.exe. The setup will detect where you have installed previous episodes before, and will copy the files to the same folder that you have installed the previous episodes.

After the setup is complete, you can safely remove the temporary files (sf3.exe, Data.sma, Setup.sma, SFSetup.exe and ReadMe.txt) and folder you may have created to extract the setup files, i.e. 'C:SFTEMP3' in the above example.

ShadowFlare: Episode Four

You must have the ShadowFlare Episode Three Version 2.003.001 installed before installing Episode Four. The version is displayed on the bottom right-hand corner of the initial screen after starting ShadowFlare.

When you download this file, do NOT directly download to 'C:Program FilesShadowFlare', but download to a temporary folder such as 'C:SFTEMP4'.

After the download has completed, you will extract AND setup the files, i.e. the installation will involve two steps. The first step is to extract the downloaded self-extracting file (sf4.exe) to a temporary folder, and the second step is to actually setup the files to the program folder.

First, double-click the downloaded file (sf4.exe), and you will be asked for 'Install Directory:'. Do NOT specify 'C:Program FilesShadowFlare' at this point. You may accept the current default folder, or specify a temporary folder such as 'C:SFTEMP4'. Then the self-extracting file will create four temporary files: Data.sma, Setup.sma, SFSetup.exe and ReadMe.txt. Please read the ReadMe.txt file before you start the program. If you use Windows XP or Windows 2000, you must log on as an Administrator before you can setup ShadowFlare.

Second, run SFSetup.exe. The setup will detect where you have installed previous episodes before, and will copy the files to the same folder that you have installed the previous episodes.

After the setup is complete, you can safely remove the temporary files (sf4.exe, Data.sma, Setup.sma, SFSetup.exe and ReadMe.txt) and folder you may have created to extract the setup files, i.e. 'C:SFTEMP4' in the above example.

ShadowFlare Pre-Scenario Demo

ShadowFlare Lobby Client (Server Browser)

You might meet players who play the Japanese version, or other language versions, of ShadowFlare. Players of any language version can play together. Obviously, if the players don't share a language, they will have difficulty chatting during the game but they will still be able to play together.

When you download this file, do NOT directly download to 'C:Program FilesShadowFlare', but download to a temporary folder such as 'C:SFTEMPL'.
After the download has completed, you will extract AND setup the files, i.e. the installation will involve two steps. The first step is to extract the downloaded self-extracting file (sflobby.exe) to a temporary folder, and the second step is to actually setup the files to the program folder.
First, double-click the downloaded file (sflobby.exe), and you will be asked for 'Install Directory:'. Do NOT specify 'C:Program FilesShadowFlare' at this point. You may accept the current default folder, or specify a temporary folder such as 'C:SFTEMPL'. Then the self-extracting file will create four temporary files: Data.sma, Setup.sma, SFSetup.exe and ReadMe.txt. Please read the ReadMe.txt file before you start the program. If you use Windows XP or Windows 2000, you must log on as an Administrator before you can setup ShadowFlare.
Second, run SFSetup.exe. The setup will detect where you have installed Episode One before, and will copy the files to the same folder that you have installed Episode One.
After the setup is complete, you can safely remove the temporary files (sflobby.exe, SFClient.exe, Setup.sma, SFSetup.exe and ReadMe.txt) and folder you may have created to extract the setup files, i.e. 'C:SFTEMPL' in the above example.
If you see the 'A required .DLL file, RK_FUNTION.DLL, was not found.' prompt message, you did not run SFSetup.exe. Please follow the procedure above to install the program correctly.

There is no monthly fee for this service. Please read the manual before you use this program.

No support is provided for this program. The server may be down occasionally for maintenance or testing.

ShadowFlare Item Catalog

The Item Catalog enables players to browse through the items they have collected or exchanged with other players. Players can use it to easily determine what items are missing from their collections and what items they may want to trade away.

When you download this file, do NOT directly download to 'C:Program FilesShadowFlare', but download to a temporary folder such as 'C:SFCAT'.
After the download has completed, you will extract AND setup the files, i.e. the installation will involve two steps. The first step is to extract the downloaded self-extracting file (sfcatalog.exe) to a temporary folder, and the second step is to actually setup the files to the program folder.
First, double-click the downloaded file (sfcatalog.exe), and you will be asked for 'Install Directory:'. Do NOT specify 'C:Program FilesShadowFlare' at this point. You may accept the current default folder, or specify a temporary folder such as 'C:SFCAT'. Then the self-extracting file will create four temporary files: Data.sma, Setup.sma, SFSetup.exe and ReadMe.txt. Please read the ReadMe.txt file before you start the program. If you use Windows XP or Windows 2000, you must log on as an Administrator before you can setup ShadowFlare.
Second, run SFSetup.exe. The setup will detect where you have installed Episode One before, and will copy the files to the same folder that you have installed Episode One.
After the setup is complete, you can safely remove the temporary files (sfcatalog.exe, sfcat.exe, Setup.sma, SFSetup.exe and ReadMe.txt) and folder you may have created to extract the setup files, i.e. 'C:SFCAT' in the above example.
If you see the 'A required .DLL file, RK_FUNTION.DLL, was not found.' prompt message, you did not run SFSetup.exe. Please follow the procedure above to install the program correctly.

Please read the manual before you use this program.

No support is provided for this program.